Wholesale Air Fryer, 5.5L at 1500W: Buyer Decisions

A $0.52-per-unit spread separates the 500-unit and 3,000-unit UAHAF12 tiers, so order volume matters before freight enters the quote. A wholesale air fryer is a retail-ready cooking platform bought in quantity; this 5.5L model pairs 1500W input, an 80-200°C range and a 60-minute timer.

// 01 — Key takeaways

15,000 m²

Guilin Use at Home Technology Co., LTD was founded in 2005 and operates this documented facility; see the Air Fryers China Trust Center.

5.5 L

UAHAF12 sits between the 4L UAHAF35 and 10L UAHAF1 in the catalog range.

1500 W

Rated input is listed for 110-127V or 220-240V, at 50/60Hz.

80-200 °C

The temperature control combines with a 60-minute timer and overheat protection.

0.168036 CBM

The catalog master carton holds four units and weighs 19 kg gross.

// 02 — Core decision

What does a 5.5L wholesale air fryer at 1500W change?

UAHAF12 combines a mid-capacity 5.5L basket with 1500W input, an 80-200°C range and a 60-minute timer. Those labels place it between smaller and larger catalog models, but basket geometry, loaded heat recovery, voltage configuration and landed carton cost still determine whether the platform fits a distributor’s market.

Capacity is a screening variable, not a serving claim

A 5.5L label states nominal basket volume, not a fixed food mass or household count. Food shape, basket floor area and airflow space change the useful load. The listed 350 x 300 x 340 mm body and 3.8 kg net weight help with shelf planning; the final acceptance record should add basket geometry and a defined food load.

Rated input sets the electrical brief

UAHAF12 is rated at 1500W and 50/60Hz, with 110-127V and 220-240V destination configurations. The order should name one voltage range, plug, cord, label and manual. Watts state electrical input, not cooking speed, so loaded heat recovery and browning belong in the acceptance method.

Sixty minutes expands the control window

The 80-200°C control and 60-minute timer provide a wider listed time window than the 30-minute UAHAF35, UAHAF17 and UAHAF1. Buyers should still assess control accuracy at the setpoints used by their market.

Capacity gets a model onto the shortlist; airflow, voltage and carton arithmetic decide whether it survives the buyer review.

— Mi Lan, Founder, Guilin Use at Home Technology Co., LTD

// 03 — Specifications

Which wholesale air fryer specifications should buyers lock?

Lock the electrical variant, temperature range, timer, material stack, removable pot and overheat protection before artwork begins. UAHAF12 combines ABS, cold-rolled sheet and PTFE with a 5.5L basket. The specification annex should keep those product facts separate from destination compliance documents and branding choices.

What does PTFE mean for the removable pot?

PTFE is the non-stick material named in the UAHAF12 product record. The U.S. FDA explains its general regulatory view of polymerized non-stick cookware coatings, including how such coatings are made and evaluated. That page is not an approval of this model or its exact coating.

The destination file should therefore carry the declaration and test evidence for the ordered food-contact construction. The FDA also separates food types and temperature conditions of use. That distinction matters because the air fryer catalog range reaches 200°C, well above room-temperature contact.

How should buyers read the electrical safety scope?

IEC 60335-2-9:2019 covers household and similar portable electric cooking appliances within its stated scope, at rated voltages no higher than 250V. It names portable ovens and roasters, and it is used with IEC 60335-1. The IEC page also says appliances intended for commercial catering fall outside that household scope.

That boundary is useful in a wholesale air fryer brief. A buyer should state whether the product is for household retail or professional food processing, then request the applicable evidence for that use, voltage and destination. Never turn a general standard reference into a model certification claim.

// 04 — Comparison

How does this wholesale air fryer compare with nearby models?

All product figures in this guide come from current catalog records. Within those records, UAHAF12 is 5.5L, 1500W, 60 minutes and $17.50 at 500 units; UAHAF35 is smaller, UAHAF17 uses 1300W at 5.5L, and UAHAF1 is 10L.

Capacity forms a three-step range

The four models form 4L, 5.5L and 10L positions. UAHAF12 can serve as a middle capacity tier without turning nominal liters into a serving-count promise.

Power and timer are separate trade-offs

UAHAF12 and UAHAF1 both list 1500W despite different capacities, while UAHAF17 pairs 5.5L with 1300W. The table identifies candidates; only a controlled loaded test can compare cooking behavior.

Entry prices need their quantity attached

Each entry price keeps its catalog quantity. UAHAF17 begins at one unit; the others begin at 500. Freight, duty, private-label work and destination evidence remain outside those unit prices.

// 05 — Acceptance

What should buyers test before placing a purchase order?

Test cooking uniformity, temperature recovery, timer behavior, shutdown, coating finish and the selected electrical build. Use one written method, fixed food load and ambient setup across candidate units. No completed UAHAF12 heat-recovery or coating-cycle result accompanies the source record, so these procedures define an acceptance annex rather than report an outcome.

Load and browning test

Use one recorded food mass, cut size, starting state and basket pattern at a fixed setpoint. Record edge-to-center color, turning and total time. The method measures usable load and airflow without converting 5.5L into an unsupported serving count.

Temperature recovery test

Position a suitable probe clear of the fan and heater. Log empty warm-up, the temperature drop after adding the fixed load and time back toward setpoint. Repeat the same run across candidates.

Timer and shutdown test

Run short, middle and 60-minute settings. Record elapsed time and heater or fan behavior at the end, then test basket-removal response only if the ordered construction specifies an interlock.

Coating and release inspection

Inspect the removable PTFE-coated pot under fixed lighting before and after the agreed cooking and cleaning cycles. Record scratches, bubbles, exposed substrate, odor and release against written pass criteria.

Electrical evidence review

Match the nameplate, cord, plug, wiring, protective devices and evidence to one bill of materials. Use IEC 60335-2-9 and destination rules as the scope brief; apply marks only to supported configurations.

// 06 — Commercials

How do price tiers and cartons shape the quote?

Start with the quantity-specific catalog price, then separate packaging, destination evidence, inspection, freight and duty. UAHAF12 moves from $17.50 at 500 units to $16.98 at 3,000 units. Its four-unit, 0.168036-CBM master carton supplies the logistics base for a quote.

UAHAF12 catalog price tiers

Pricing begins at 500 units, while the packaging record lists a standard MOQ of 1,000. The quote should state which quantity governs the requested color, logo, packaging and destination build.

Master-carton facts

Landed cost needs separate lines

Separate the appliance, branded box, manual, electrical build, destination evidence, inspection, freight and spares. Commercial options include FOB China, EXW or CIF, 30/70 T/T and a 12-month warranty.

// 07 — Buyer fit

Who should shortlist the UAHAF12 platform?

Shortlist UAHAF12 when a range needs 5.5L, 1500W, a 60-minute timer and a removable non-stick pot in one platform. It suits distributors building a middle capacity tier and private-label buyers prepared to define voltage, finish, packaging and acceptance criteria before the main order.

Mid-capacity distributor ranges

UAHAF12 sits between 4L UAHAF35 and 10L UAHAF1. Position it with basket dimensions and a tested food load, not an unsupported household or serving count.

Private-label and OEM programs

OEM and ODM briefs can specify logo, color and packaging. Set the product specification, destination electrical build, artwork and acceptance method before fixing the production schedule.

Who should choose another model?

Choose 4L, 1200W UAHAF35 for a smaller position, 10L UAHAF1 for greater nominal capacity, or 5.5L, 1300W UAHAF17 when that power and 30-minute control window fit the brief.

What should the retail claim set include?

Keep claims to the supported 5.5L, 1500W, 80-200°C, 60-minute timer, rapid air circulation, overheat protection and removable non-stick pot. Omit unsupported serving counts, speed percentages, health outcomes and unrelated certification logos.

// 08 — Manufacturing

How should UAHAF12 manufacturing controls be written?

UAHAF12 order controls should connect the listed material stack, destination voltage, 1500W rating, removable PTFE-coated pot, overheat protection and carton file to one bill of materials. This specification-control workflow defines buyer requirements, while the 12-month warranty establishes the claim route after shipment.

// 09 — Purchase order

What belongs in a wholesale air fryer purchase order?

The purchase order should identify UAHAF12, its electrical build, plug, materials, coating, controls, artwork, packing, quantity tier, Incoterm, payment schedule, production window, inspection method and warranty route. Attach one signed specification and acceptance annex so every commercial line points to the same construction.

Electrical configuration

Write 110-127V or 220-240V, plus 50/60Hz, destination plug, cord, label, 1500W rating and overheat protection in one annex.

Food-contact and finish schedule

Name the removable PTFE-coated pot, ABS and cold-rolled-sheet parts, color, logo position, printing method, packaging artwork and destination food-contact declaration.

Packing annex

Start with the 325 x 325 x 375 mm retail package and four units per 660 x 335 x 760 mm carton. Record changes caused by custom inserts or boxes.

Commercial schedule

State quantity, unit price, Incoterm, 30/70 T/T, production window and warranty route. The listed bulk-production range is 15-30 days after deposit; customization and artwork readiness shape the signed schedule.

// 10 — FAQ

Wholesale air fryer FAQ for UAHAF12 buyers

Buyers most often ask how to interpret 1500W, where the price tiers begin, what fits in the master carton and which safety scope applies. These concise answers keep the UAHAF12 product facts, commercial quantities and IEC context together without repeating the full specification blocks above.

// 11 — Decision

Is UAHAF12 the right 5.5L platform?

UAHAF12 belongs on the shortlist when 5.5L, 1500W, 80-200°C control, a 60-minute timer and a removable PTFE-coated pot fit the range plan. Move forward only when the selected voltage, loaded acceptance method, food-contact file, carton plan and quantity-specific quote form one coherent order.

Use one decision rule

Choose the combined platform, not one isolated number. UAHAF12 provides exact electrical, material, control, price and carton fields for a defined proposal. If that center fits the market, compare a physical unit with the written acceptance annex and use the UAHAF12 product page to request the matching quote.

Similar products