6L Air Fryer, 1300W: What Wholesale Buyers Must Test
6L Air Fryer, 1300W: What Wholesale Buyers Must Test
The catalog displays $15.44 at 500 units, but its structured record sets the standard MOQ at 1,000 units, priced at $15.29; the $150 comparison across 1,000 units contrasts displayed tiers, not an orderable 500-unit baseline. The UAHAF33 6L air fryer is a 1300W mechanical basket cooker; use the four-record go/no-go test below to decide whether the ordered configuration is ready.
// 01 — Key takeaways
Founded in 2005, Guilin Use at Home Technology Co., LTD operates a 15,000 m² facility with 205 workers. See the documented facts in the Trust Center.
The UAHAF33 6L air fryer pairs mechanical controls with an 80–200°C range and a 30-minute timer.
The lowest fetched catalog tier is $14.98 per unit at 3,000 units.
One recorded master carton holds four units and has a 19 kg gross weight.
The stated warranty is 12 months, with order-specific claim handling set in the commercial agreement.
// 02 — Decision record
What makes the 6L air fryer an orderable SKU?
UAHAF33 becomes orderable when its base product identity, destination build, evidence, and commercial terms agree. The catalog defines the 6L, 1300W mechanical model; the purchase specification defines the unit to be supplied. The single master checklist is the four-record go/no-go test in the decision section.
Start with the destination electrical build
The catalog lists 110–127V~ and 220–240V~ at 50/60Hz. These are alternative destination builds, not a universal appliance. Select one market build before artwork starts, then carry its configuration identifier through production and shipping records; the master go/no-go test governs the detailed electrical fields.
Separate vessel volume from a serving claim
Six litres is the listed capacity, but usable food area also depends on pot geometry and how ingredients are arranged. A distributor should build portion examples from a production-intent sample, measured food mass, and a repeatable loading pattern. This avoids turning a vessel-volume figure into an unsupported promise about family size or batch output.
Keep one evidence trail
The live UAHAF33 product record supplies the starting data. A buyer then freezes one configuration and carries its identifier through the four master records. Each retail statement should trace to that record set rather than to a different sample or sibling model.
A wholesale air fryer is ready for a purchase order only when its product data, sample, compliance file, and carton marks describe the same configuration.
— Mi Lan, Founder, Guilin Use at Home Technology Co., LTD
// 03 — Specifications
What do UAHAF33 specifications establish?
The UAHAF33 specification establishes identity and purchasing inputs: material, electrical rating, capacity, controls, timer, temperature range, removable pot, and protection feature. It does not establish heat-up time, temperature uniformity, coating life, food yield, or energy savings, because the catalog provides no measured results for those claims.
UAHAF33 specification sheet
Rev. 2026.08
The values below reproduce the fetched product record. Any performance tolerance belongs in the buyer’s test method.
| Specification | UAHAF33 catalog value | Purchasing use |
|---|---|---|
| Capacity | 6L | Defines listed vessel volume |
| Rated power | 1300W | Supports electrical and label review |
| Rated voltage | 110–127V~ / 220–240V~ | Select one destination build |
| Rated frequency | 50/60Hz | Match destination supply |
| Material | ABS + cold rolled sheet + PTFE | Directs material and food-contact review |
| Temperature range | 80–200°C / 175–395°F | Defines the dial’s stated range |
| Timer | 30 minutes | Defines the stated cycle limit |
| Pot | Removable, PTFE non-stick | Shapes cleaning and abrasion instructions |
| Protection | Overheat protection | Requires model-linked safety evaluation |
Is 1300W enough for a 6L air fryer?
1300W is the model’s electrical rating; “enough” depends on the buyer’s accepted results under a defined load. Measure warm-up behavior, temperature recovery, browning distribution, timer action, and shutoff on the selected voltage. Rated power alone cannot predict airflow, heater geometry, control tolerance, or the result of a crowded pot.
Which dimensions control shelf and freight planning?
The appliance measures 370 × 275 × 320 mm and weighs 3.7 kg net. Its individual package measures 380 × 315 × 360 mm with 4.5 kg gross weight. These figures support shelf-depth, warehouse, and listing work; the master-carton data belongs in the commercial section because it controls case handling and container planning.
// 04 — Model choice
How do directly fetched air fryers compare?
UAHAF33 sits between the directly fetched JN-8001-DZ and UAHAF4 by listed capacity and rated power. The comparison uses each model’s own fetched record, including its actual lowest tier. It shows assortment roles; it does not claim that capacity, wattage, control type, or price alone determines cooking quality.
| Model | Capacity | Rated power | Control / timer | Lowest fetched tier |
|---|---|---|---|---|
| JN-8001-DZ | 3L | 800W | Mechanical knob | $8.19/unit at 5,000 units |
| UAHAF33 Featured | 6L | 1300W | Mechanical / 30 minutes | $14.98/unit at 3,000 units |
| UAHAF4 | 10L | 1500W | Touch / 60 minutes | $21.60/unit at 3,000 units |
Where does each model fit a range?
JN-8001-DZ provides a compact 3L mechanical option. UAHAF33 supplies a larger 6L mechanical step without a touch interface. UAHAF4 moves to 10L, 1500W, and touch control. A distributor can use those documented differences to create distinct price and feature positions, then test each model on its own merits.
Why can the lowest price mislead?
The displayed lows belong to different tier quantities, so they are not like-for-like quotations. Configuration, branding, packaging, compliance work, Incoterm, freight, duty, inspection, payment charges, and local handling can change landed cost. Compare dated offers built from the same market brief instead of subtracting unrelated catalog lows.
// 05 — Commercial data
What do MOQ, tiers, and cartons change?
The commercial record sets the negotiation: four price tiers run from 500 to 3,000 units, while the packaging record lists a 1,000-unit standard MOQ. Each master carton holds four units at 0.182208 m³ and 19 kg gross. A dated quotation must reconcile the MOQ and tier selected for the final build.
What are the UAHAF33 price tiers?
These are the exact fetched catalog tiers, before freight and order-specific additions.
| Quantity | Discount per unit | Catalog price per unit |
|---|---|---|
| 500 | $0.00 | $15.44 |
| 1,000 | $0.15 | $15.29 |
| 2,000 | $0.31 | $15.13 |
| 3,000 | $0.46 | $14.98 |
What is in the pack-out record?
The pack-out gives a buyer real case, handling, and container inputs rather than a generic “export carton” claim.
| Pack-out item | UAHAF33 value | Planning use |
|---|---|---|
| Unit net / gross weight | 3.7 kg / 4.5 kg | Handling and listing data |
| Product size | 370 × 275 × 320 mm | Counter and shelf fit |
| Package size | 380 × 315 × 360 mm | Single-unit storage |
| Master carton | 640 × 390 × 730 mm | Case and pallet planning |
| Units per carton | 4 | Case count |
| Carton gross weight | 19 kg | Warehouse handling |
| CBM per carton | 0.182208 | Freight input |
| 20ft / 40ft / 40HQ quantity | 570 / 1,185 / 1,492 units | Catalog container reference |
| Standard MOQ | 1,000 units | Commercial baseline |
Which terms belong on the quotation?
The fetched record states 15–30 days after order and sample confirmation, FOB China with EXW or CIF available, 30/70 T/T terms, and a 12-month warranty. A dated quotation should state the selected tier, Incoterm, destination, payment milestones, production window, and warranty route. Product-build fields remain governed by the master four-record test.
// 06 — Sample test
How should a 6L air fryer sample be tested?
Test the production-intent UAHAF33 at the ordered voltage with a written method. Record supply conditions, food mass and layout, set time and temperature, surface readings, internal food endpoint, recovery, timer behavior, shutoff, handle temperature, cleaning, and visible wear. Repeat the same load so observations can be compared.
Test controls before recipes
Inspect dial alignment, print contrast, knob grip, timer travel, end-of-cycle behavior, and restart behavior after the pot is removed. Record actual observations instead of calling mechanical controls inherently easier. This checks whether the interface suits the channel and whether the instructions describe what the sample really does.
Measure loaded performance
Use one defined food mass, piece size, starting temperature, arrangement, setpoint, and endpoint. Photograph placement and record when the load is turned or shaken. A repeatable test can expose edge-to-center differences and recovery behavior; an informal tasting cannot support a cooking-speed, energy, or serving claim.
Inspect the non-stick system
Review the removable pot’s surface, contact parts, cleaning instructions, and abrasion warnings before and after the agreed cycle test. The FDA’s food-contact PFAS page distinguishes polymerized non-stick cookware applications from grease-proof paper uses and explains that authorization depends on the substance and intended use.
// 07 — Channel fit
Which buyers fit this mechanical model?
UAHAF33 fits distributors, retailers, and private-label programs seeking a household 6L air fryer with physical time and temperature controls. It is a poor fit when the brief requires touch presets, a viewing window, dual zones, or professional catering classification, because none of those features appears in its fetched record.
Distributors and value-led retail
The model can occupy a middle-capacity slot between the fetched 3L and 10L alternatives. Its story is concrete: 6L, 1300W, 80–200°C, a 30-minute timer, a removable PTFE pot, and overheat protection. Retail content should use tested loading examples rather than a fixed household-size promise.
OEM and private-label programs
Guilin Use at Home Technology Co., LTD offers branding, packaging, and color work where volume permits. Define those changes against the frozen product specification and quote any tooling or unit-cost effect separately. This keeps customization inside the same configuration rather than creating a parallel record.
Household use, not commercial catering
IEC 60335-2-9:2019 covers portable household and similar cooking appliances up to 250V and says appliances intended professionally to process food for commercial consumption fall outside household and similar use. Position UAHAF33 for its documented household category unless a separate professional-use evaluation supports another claim.
// 08 — Manufacturing
How we manufacture UAHAF33
Guilin Use at Home Technology Co., LTD controls assembly, line testing, and packing under one roof. For UAHAF33, manufacturing follows the frozen product specification and order identifier through each stage. Quality control links every physical unit and carton to that record; the factory workflow executes the master configuration rather than redefining it.
In-house tooling and mould review
The factory reviews housing fit, handle, pot, dial layout, logo location, color, and visible surfaces against the selected base design. Any private-mould change is defined before the production-intent sample, so the signed configuration can control later work.
Heater, fan motor, wiring, and controls
Assembly brings together the heating and airflow system, mechanical controls, wiring, housing, and removable pot for the frozen electrical build. Its configuration identifier follows the line record.
Quality control and functional testing
Line checks cover the functions and safety points defined for the build, including timer action, temperature control, overheat protection, fit, finish, and pack-out. Inspection criteria should name the method and acceptance limit for every result the buyer intends to enforce.
CE and RoHS names, plus warranty
CE and RoHS are supported certification names for relevant export programs; order evidence must match the model, configuration, and destination. UAHAF33 carries a 12-month warranty, with the claim route and after-sales responsibilities written into the agreement.
The documented factory has seven production lines, 205 workers, and capacity up to 100,000 units per month across its appliance range. Those are company-level facts, not a promise that one SKU receives the full capacity. The order schedule controls UAHAF33 timing.
// 09 — Compliance
What belongs in the importer file?
The importer file should identify UAHAF33 and hold destination evidence for electrical safety, EMC, restricted substances, food contact, labeling, and traceability. It is one of the four master records, not a second product checklist; each document should cite the frozen configuration identifier used for the order.
Electrical scope and model identity
IEC 60335-2-9 is the particular safety standard for grills, toasters, and similar portable cooking appliances and is used with IEC 60335-1. National routes can add or change requirements. The report and production unit should carry the same model and configuration identifier; a construction change needs document review before that evidence is reused.
Food-contact scope for PTFE
The UAHAF33 record names PTFE in the removable non-stick pot. FDA’s 21 CFR food-contact inventory organizes authorized substances by identity, intended use, and use conditions. An importer should obtain evidence for the actual coating system and apply the destination market’s rules rather than treating the word “PTFE” as a complete approval.
Labels, instructions, and traceability
Use the frozen configuration identifier on final labeling, instructions, batch trace, and warranty records. Give translations a technical review within the artwork workflow. A revision cannot inherit evidence from an earlier build without a documented assessment.
// 10 — FAQ
Frequently asked questions
These answers address the live questions buyers ask about 6L capacity, 1300W power, mechanical controls, non-stick coatings, price tiers, and wholesale evaluation. They distinguish fetched UAHAF33 facts from the performance results and destination documents that must come from the ordered configuration.
Is 1300W enough for a 6L air fryer?
Is a 6L air fryer big enough for a family of four?
What should I look for when buying a 6L air fryer?
Are mechanical air fryer controls easier to use?
What are the UAHAF33 MOQ and price tiers?
What food-contact evidence is needed for the PTFE pot?
// 11 — Decision
When should you order UAHAF33?
Order UAHAF33 when its 6L capacity, 1300W rating, mechanical controls, 30-minute timer, and removable PTFE pot fit the range, and when the master four-record go/no-go test passes for the destination build. If one record identifies a different configuration or an acceptance result fails, resolve that mismatch before deposit.
The master four-record go/no-go test
This is the post’s single configuration checklist. Use four records: the frozen product specification, the signed production-intent sample, the destination compliance file, and the dated commercial agreement. Proceed only when all four identify the same model, voltage, plug, materials, controls, artwork revision, carton, claims, price basis, inspection criteria, and warranty route. This single check ties configuration, evidence, and acceptance together.
Featured product: UAHAF33
// Featured model
UAHAF33 6L Mechanical Air Fryer
6L · 1300W · 110–127V~ / 220–240V~ · 50/60Hz · 80–200°C · 30-minute timer
Review the product record, then request a dated offer tied to the same frozen configuration and selected commercial terms.
Similar products
Compare other catalog positions with real, resolving product records.
Frytkownica powietrzna, 7L, 1500W, sterowanie dotykowe, minutnik 60 min
Frytkownica powietrzna, 5,5L, 1500W, regulowana temperatura
Heißluftfritteuse, 10L, 1500W, digitale Touch-Steuerung, 80-200°C
Ready to order or need a wholesale quote?
Air Fryers China supplies air fryers and countertop cooking appliances from the Guilin, China factory of Guilin Use at Home Technology Co., LTD. OEM, private-label, and B2B programs are welcome. Tell us your market, configuration, and volume.
